Short answer: Measure each wall, the ceiling height, window and door openings and services, then photograph every wall; you can also scan a room with an iPhone or iPad that has LiDAR using the iOS app and open it as an editable 3D room, but always confirm key dimensions with a tape measure before ordering anything.

What to measure

  • Wall lengths at floor and at ceiling height; walls are rarely square.
  • Ceiling height in several places.
  • Windows and doors: width, height, sill height and position from the corner.
  • Radiators, sockets, switches, pipes and stack positions.
  • Chimney breasts, alcoves, beams and steps.

Three ways to capture the room

MethodGood forWatch out for
Tape and sketchSimple roomsEasy to miss angles and heights
Photos in the plannerQuick starting modelThe 3D model is an estimate from photos; check against your tape
LiDAR scan (iOS app)Fast, whole-room captureScans are estimates; confirm critical dimensions

Check the model

Open the room in Plan & 3D, compare key dimensions and adjust walls, doors and windows in the editor. Then share a live link so a builder, kitchen designer or partner can view the room without an account.

What to send each builder

  • A dimensioned plan.
  • Photos of each wall and the services.
  • A list of what stays and what goes.
  • The same specification for every quote.

Frequently asked questions

Is a LiDAR scan accurate enough for ordering a kitchen?

It is good for planning but treat it as an estimate: a kitchen company will take final measurements.

Do I need an account to share a room?

No, viewers can open a share link without an account.

Open the studio and start from a photo or scan

This guide is general information for homes in the UK, not legal, structural or financial advice. Costs are indicative ranges and vary with your property, region, specification and builder; always obtain written quotes.