Short answer: Removing a load-bearing wall typically costs about £3,000 to £8,000 in 2026, including the structural engineer, a steel beam, temporary support, Building Control and making good. A non-load-bearing partition is far cheaper, at roughly £500 to £1,500.

What you pay for

ItemTypical cost
Structural engineer calculations£400–£1,200
Steel beam supplied and fitted with props£1,500–£4,000
Building Control fee£200–£600
Plastering, making good and decoration£600–£1,800
Skip and dust protection£250–£500

Basis: typical UK 2026 builder and supplier prices for labour and materials, excluding VAT, design fees and application fees. London and the South East often run 15 to 30 per cent higher; much of the north, Scotland, Wales and Northern Ireland is often lower.

The process step by step

  • Engineer visits and designs the beam and pad stones.
  • Building Control approves the design.
  • Temporary props (Acrow props) carry the load.
  • The wall is removed and the beam fitted and packed.
  • Fire protection, plastering and floor making good.

What can go wrong

  • A chimney breast or services hidden in the wall.
  • Electrical cables or pipework that need rerouting.
  • Floor level differences between rooms.

Plan the opening first

The width of the opening and where furniture and the kitchen run decide whether the change is worth the cost. Draw the new layout in 3D and walk through it before you commission calculations.

Frequently asked questions

How do I know if a wall is load-bearing?

You cannot be certain without a survey. Walls perpendicular to floor joists and those supporting upper floors or roofs are often load-bearing; an engineer will confirm.

Do I need Building Regulations approval?

Yes, for structural alterations.

Test the open-plan layout in 3D first

This guide is general information for homes in the UK, not legal, structural or financial advice. Costs are indicative ranges and vary with your property, region, specification and builder; always obtain written quotes.